Download Siemens Logo!soft Comfort 8.1 (crack keygen)

Download Siemens Logo!soft Comfort 8.1 (crack keygen)

It is recommended to always keep the LOGO! Soft Comfort software up to date with the latest Upgrades/Updates. Updated software is required to be able to communicate with the latest device releases.
An Update improves the software within the same version e.g. from V6.0.17 to V6.1.12 via a Service Pack (SP). It is possible to update directly from Internet within LOGO! Soft Comfort or via downloading and installing the required files.
An Upgrade improves the software to a higher version, e.g. from V4 to V8.
This can be done via the internet directly within LOGO! Soft Comfort or downloading and installing the required files or purchasing the upgrade on a CD.
PREREQUISITE: A fully functional, original, licensed version of LOGO! Soft Comfort must already be installed.

FEATURES:
Eight basic units for all voltages, with or without a large display
All devices are equipped with an Ethernet port and connections are, of course, compatible with previous versions
Seven digital modules and three analog modules
Maximum configuration: 24 digital inputs, 20 digital outputs, 8 analog inputs and 8 analog outputs
The temperature range has been extended to between –20 °C and +55 °C for
LOGO! basic units as of product version FS:04 and for expansion modules as of product version FS:03
Time synchronization between LOGO! basic units (version FS:04 and higher)
LOGO! 8 as SIPLUS extreme for use in especially harsh conditions, e.g. extreme temperature ranges, 100% relative humidity including condensation and frost. Conformal coating for protection against chemically, biologically and mechanically active substances as well as salt spray
With the LOGO! CMR, a cell phone or tablet can receive status data and alarms
from the LOGO! station via text message or email
The user can configure text messages as plaintext (e.g. FAN_ON)
Secure remote access via https or Open VPN in the mobile network allows configuration changes and diagnostics both on the web server of the LOGO! CMR and on LOGO! 8. The program can be uploaded and downloaded to and from LOGO! 8
Position detection via GPS can be used, e.g. for cost-effective container tracking. The position is reported to the LOGO! basic module or passed on to a central office by text message or email
Via LOGO! CMR, the clock time of the LOGO! 8 can be synchronized with an accessible NTP server, a GPS or a mobile wireless signal

DOWNLOAD LINK

https://k2s.cc/file/77171b03b854e/Siemens_Logo%21soft_Comfort_8.1.rar